Order number: 117.7539

efuturo® wallbox with Type 2 socket plug

station one, 1-phase, up to 3.7 kW, 16 A, 230 V, Mode 3, without RFID access control, without electricity meter
  • Charging station for wall or column mounting compliant with IEC61851
  • For electric and hybrid vehicles
  • With socket Type 2 (IEC 62196-2)
  • Up to 3.7 kW charging capacity
  • Up to 16 A (single-phase)
  • 230 V
  • Mode 3
  • Residual current circuit breaker RCD Type B
  • With overheating protection
  • TÜV approved, CE and RoHS certified

RFID:

electric meter:

€1,791.11 *
excl. VAT plus shipping costs

Delivery time approx. 5 working days

Description

Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors.

The integrated Type 2 socket connects the wallbox and your electric or hybrid vehicle quickly and simply with your personal Type 2 charging cable. The charging of the vehicle battery begins after short communication between the wallbox and vehicle without access control.

Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution.

The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

Common specification
Manufacturer number
117.7539
EAN
4042146865118
Electric meter
no
Wallbox version
plug socket
RFID
no
Norm / guideline
IEC 61851
Plug wallbox end
Type 2
Charging mode
Mode 3
Dimensions
199 x 326 x 132 mm
Colour
black / black
Access protection
no
expandable by column for wallboxes
yes
Operating temperature
-40°C to +45°C
IP protection
IP 55
Protective device
RCD type B
Coupling cycles
up to 10.000
Assembling possibilities
Wall fastening or on column
Electrical specification
Charging capacity
up to 3,7 kW
DC fault current detection
yes
Communication
(IEC 62196-2): Mode 3
Voltage
230 V AC
Accessories